Skeg Guards to suit all outboards and Sterndrives

If you have a damaged skeg or just want to protect your skeg from future damage, Skeg Guard is the answer! We will have a skeg replacement skeggard to suit your outboard or sterndrive. We have Mercruiser skeg guard, Yamaha skeg guard, suzuki skeg guard, tohatsu skeg guard, mariner skeg guard, honda skeg guard, volvo skeg guard, johnson skeg guard, evinrude skeg guard and mercury skeg guard to suit all outboard engines & Sterndrives 40 horse power upwards. Simply choose the correct skeg protector for your outboard or sterndrive below.

Skeg Guards

Desc

Items 1-9 of 22

View as Grid List
per page
  1. NZ$155.00
    Volvo Skeg Guard, Replacment Skeg SKEGGARD suits All Model Volvo Sterndrives

    VOLVO PENTA SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE

    •  SX Drive (Single Prop) 1995-2006 (Part#99022)
    •  DP Drive (Dual Prop) 1996-2007 (Part#99019)
    •  SX Drive (Single Prop) 2007 & Newer (Part#99019)
    •  SX & DP 2007-2015  (Part#99020) - please let us know if you require this size

    IF YOU’RE UNSURE OF SKEG GUARD FITMENT ON YOUR OUTBOARD OR STERNDRIVE PLEASE EMAIL US AT INFO@MARINEZONE.CO.NZ OR CALL US ON 021 184 4242 & WE WILL ADVISE THE CORRECT SKEG GUARD

    WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR VOLVO STERNDRIVE

    Learn More
  2. NZ$30.00
    SKEGGARD Bolts and Loctite for SKEG GUARDS extra bolts and locktite

    This LISTING is for LOCTITE and BOLTS that are used to fix the SKEGGARD to the skeg. 
    From time to time bolts may get lost or loosen. Keep a extra set handy for repairs. 

    Conveinantly packaged in a snaplock bag, 
    containing 4ss BOLTS, 2ss BOLT ENDS and the LOCTITE Glue 

    SKEGGARD are manufactured for 20hp and up. 

    Learn More
  3. NZ$155.00
    MERCURY MARINER Replacement SKEG GUARD, SKEGGARD 25-30hp
    Mercury Mariner Skeg Guard, Replacement Skeg SKEGGARD Suits 25-30hp Mercury Mariner Outboard Engines: - 25hp 2 & 4 Stroke All Years - 30hp 2 & 4 Stroke All Years *Revamp your Mercury Mariner Outboard Skeg with this great looking SKEGGARD in polished Stainless* * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard* *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard* *Manufactured in the USA with thousands sold* *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs* "Now there is a better and cheaper way to repair lower unit Skeg damage" *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage* *Self Draining* *Fits like a Glove over both sides of your Damaged or New Skeg* *Does NOT affect the PERFORMANCE* *TAKES LESS THAN 5 MINUTES TO INSTALL* ************EACH SKEG GUARD COMES WITH BOLTS ,LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************ Learn More
  4. NZ$155.00
    HONDA 25-30hp SKEG GUARD, Replacement SKEGGARD

    HONDA Skeg Guard, Replacement Skeg SKEGGARD

    SUITS - HONDA 25-30HP

    Honda Outboard Engines: 
    - BF 25 All Years 
    - BF 30 All Years

    PART NUMBER 99036 

    KEY POINTS:

    *Revamp your Honda Outboard Skeg with this great looking SKEGGARD in polished Stainless*

    * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard*

    *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard*

    *Manufactured in the USA with thousands sold*

    *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs*

    "Now there is a better and cheaper way to repair lower unit Skeg damage"

    *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage*

    *Self Draining*

    *Skeg guard fits like a glove over both sides of your new or damaged skeg*

    *ONLY SKEG GUARD ON THE MARKET WITH A FOOTER FOR EXTRA PROTECTION & LONGER LIFE!!

    *Does NOT affect the performance*

    *Takes less than 5 minutes to install*


    ************EACH SKEG GUARD COMES WITH BOLTS, LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************

    Learn More
  5. NZ$155.00
    Tohatsu SKEG GUARD 25-30hp, SKEGGARD * Quality USA Manufactured*

    SUITS -TOHATSU or NISSAN OUTBOARD ENGINES 25-30HP

    - 25hp 1986 & Newer - 30hp 1985 & Newer

    Also fits Mercury outboards: - 25hp (4 stroke) 2006 & Newer

    - 30hp (4 stroke) 2006 & Newer 99036

     KEY POINTS:

    *Revamp your Tohatsu/Nissan Outboard Skeg with this great looking SKEGGARD in polished Stainless*

    * All you need is 2-3 Inches of Skeg remaining to Install a Skeg Guard*

    *Drill x2 1/4 Inch holes through your Outboard/Sterndrive Skeg to Install a Skeggard*

    *Manufactured in the USA with thousands sold*

    *Dont risk damage to seals and bearings with the heat from welding of outboard and sterndrive skegs*

    "Now there is a better and cheaper way to repair lower unit Skeg damage"

    *Simply bolt on SKEGGARD right over your damaged or non damaged Skeg.

    It is quick,its easy,and its stronger than the original,so it protects your Skeg and Propeller from future damage*

    *Self Draining*

    *Skeg guard fits like a glove over both sides of your new or damaged skeg*

    *ONLY SKEG GUARD ON THE MARKET WITH A FOOTER FOR EXTRA PROTECTION & LONGER LIFE!! *Does NOT affect the performance*

    *Takes less than 5 minutes to install*

    ************EACH SKEG GUARD COMES WITH BOLTS, LOCTITE AND EASY TO INSTALL INSTRUCTIONS!!************

    Learn More
  6. NZ$155.00
    YAMAHA outboard SKEG GUARD, Replacement SKEGGARD 20-25-30hp

    Suits 20-30hp Yamaha Outboard Engines:
    20 HP 2 Strokes 1994-1997
    25 HP CV 2 Strokes All Years
    30 HP CV 2 Strokes All Years
    25 HP 2 Strokes 1980 and Newer
    F25 HP (4-Stroke) 1998 and Newer
    30 HP 2 Strokes 1983 and Newer
    30 HP 4 Strokes (10 tooth/spline models only)

    KEY POINTS:

    High Quality 316 Marine Grade Stainless Steel (MADE IN THE USA)

    No Welding Needed

    Easy Installation and Support

    Over 50 Different Models in Stock

    Quality Tested and Approved

    Self Draining

    Comes with Male & Female Stainless Locking Screws & Loctite

    Fits like a Glove over you’re New or Damaged Skeg

    You only need 2-3 inches left of a damaged Skeg to install

    Only Skeg Guard on the market with a footer for extra protection and longer life!

    EACH SKEG GUARD COMES WITH BOLTS, LOCTITE AND EASY TO INSTALL INSTRUCTIONS!

    Learn More
  7. NZ$155.00
    Tohatsu Skeg Guard, Replacement Skeg SKEGGARD suits 40-140hp Tohatsu Outboards

     TOHATSU SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE

    • 40-50HP All years (Part#99017) 
    • 70-90-115-120-140HP All Years (Pat#99007)

    IF YOU’RE UNSURE OF SKEG GUARD FITMENT ON YOUR OUTBOARD OR STERNDRIVE PLEASE EMAIL US AT INFO@MARINEZONE.CO.NZ OR CALL US ON 021 184 4242 & WE WILL ADVISE THE CORRECT SKEG GUARD


     WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR TOHATSU

    Learn More
  8. NZ$155.00
    Force Skeg Guard, Replacement Skeg SKEGGARD suits 70-150hp Force Outboards

    FORCE SKEG GUARD MODELS/ PART NUMBER CROSS REFERENCE

    • 70 and 75 HP 2-Stroke 1991-1997 (Part#99017)
    • 70 and 90 HP (By Mercury) 2-Stroke 1998-2002 (Part#99007) 
    • 85 and 90 HP 2-Stroke 1988-1996 (Part#99018)
    • 90-120-150 HP L-Drive 2-Stroke 1988-1991 (Part#99018)
    • 120-125-150 HP 2-Stroke 1988-1996 (Part#99018)

    IF YOU’RE UNSURE OF SKEG GUARD FITMENT ON YOUR OUTBOARD OR STERNDRIVE PLEASE EMAIL US AT INFO@MARINEZONE.CO.NZ OR CALL US ON 021 184 4242 & WE WILL ADVISE THE CORRECT SKEG GUARD

     WHEN ORDERING ONLINE USE THE SIZE DROP DOWN BOX BELOW TO SELECT THE CORRECT PART NUMBER SKEGGARD FOR YOUR FORCE OUTBOARD

    Learn More
Desc

Items 1-9 of 22

View as Grid List
per page
To Top