Quick Overview

Quick Overview 
Solid Scuff Buster- 5.75" X 4.5" inches 

Protects your boat's gelcoat 

Minimizes roller and trailer scuffs 

Bends to conform to hull 
Made from anti-corrosive, 22-gauge 304 stainless steel. 

Sticks to your boat's surface with 3M® pressure-sensitive adhesive

Bow Guard XL 
Megaware BowGuard XL 

-Protects your Boat’s Gelcoat 
-Minimize Roller and Trailer Scuffs 
-Bend to Conform to Hull 
-Mirror Polished Finish 
-Stainless Steel 
-Best Quality made by 3M® 

Protects your boat from scuffs and abrasion caused by trailer rollers. 
Dimensions: 9" x 8.75" (inches) 
Attaches with 3M® pressure-sensitive adhesive 

Protects your boat from scuffs and abrasion caused by trailer rollers. 

Protect your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, ScuffBuster products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives

Kayak Keel Guard - Black

Length 43cm x Width 7cm. Thickness 4mm

Brand - One Objective - USA Made.

Protect the bottom of your kayak from scratches and scraps when pulling the boat up onto shore, across the sand or gravel or even the trailer!

Prolongs the life of your Kayak

Plyable Durable Rubber that Molds to the Hull of the Boat.

Top Quality

Easy Installation - Instructions included

Suitable for most popular makes and models,

Ocean Kayak, Bonafide, Lagoon, Torpedo 7, Viking, Hydros, Wave, Vibe Shipjack,  Barracuda

Just to name a few!

New Zealand's Exclusive distributor

https://youtu.be/-9R4yDpj_VA

SIZE KEEL GUARD:

4 Feet 

SUITS:

Boats up to 14 Foot

• PROTECT AGAINIST ABRASIVE SAND, ROCKS, CONCRETE RAMPS & OYSTER BEDS ELIMINATE COSTLY REPAIRS
• ENJOY THE HIGHEST QUALITY AND SUPPERIOR ENGINEERING
• INCREASE THE VALUE OF YOUR BOAT 
• MADE IN THE USA
• QUALITY 3M PRODUCT
• TYPICALLY , THE KEEL GUARD IS MOUNTED 4 TO 6 INCHES ABOVE THE WATERLINE ON THE BOW, ENDING 2 TO 3 FEET OR MORE BEYOND THE LOWEST POINT OF THE KEEL.

SIZE KEEL GUARD:

5 Feet 

SUITS:

Boats up to 16 Foot

• PROTECT AGAINIST ABRASIVE SAND, ROCKS, CONCRETE RAMPS & OYSTER BEDS ELIMINATE COSTLY REPAIRS
• ENJOY THE HIGHEST QUALITY AND SUPPERIOR ENGINEERING
• INCREASE THE VALUE OF YOUR BOAT 
• MADE IN THE USA
• QUALITY 3M PRODUCT
• TYPICALLY , THE KEEL GUARD IS MOUNTED 4 TO 6 INCHES ABOVE THE WATERLINE ON THE BOW, ENDING 2 TO 3 FEET OR MORE BEYOND THE LOWEST POINT OF THE KEEL.

SIZE KEEL GUARD:

6 Feet 

SUITS:

Boats up to 18 Foot

• PROTECT AGAINIST ABRASIVE SAND, ROCKS, CONCRETE RAMPS & OYSTER BEDS ELIMINATE COSTLY REPAIRS
• ENJOY THE HIGHEST QUALITY AND SUPPERIOR ENGINEERING
• INCREASE THE VALUE OF YOUR BOAT 
• MADE IN THE USA
• QUALITY 3M PRODUCT
• TYPICALLY , THE KEEL GUARD IS MOUNTED 4 TO 6 INCHES ABOVE THE WATERLINE ON THE BOW, ENDING 2 TO 3 FEET OR MORE BEYOND THE LOWEST POINT OF THE KEEL.

The Original Do-It-Yourself Keel Protector Wear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else. Protect against abrasive sand, rocks, concrete ramps and oyster beds Eliminate costly repairs Enjoy the highest quality and superior engineering Increase the value of your boat Every aspect of the patented KeelGuard has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing KeelGuard’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the KeelGuard the easiest keel protector to install, and gives it unparalleled quality and dependability. KeelGuard comes in 11 great looking colours to match virtually any boat. All colours are UV-stabilized for true color that lasts a lifetime. KeelGuard is available in nine standard lengths or can be ordered in custom lengths.

SIZE KEEL GUARD:

7 Feet 

SUITS:

Boats up to 20 Foot

• PROTECT AGAINIST ABRASIVE SAND, ROCKS, CONCRETE RAMPS & OYSTER BEDS ELIMINATE COSTLY REPAIRS
• ENJOY THE HIGHEST QUALITY AND SUPPERIOR ENGINEERING
• INCREASE THE VALUE OF YOUR BOAT 
• MADE IN THE USA
• QUALITY 3M PRODUCT
• TYPICALLY , THE KEEL GUARD IS MOUNTED 4 TO 6 INCHES ABOVE THE WATERLINE ON THE BOW, ENDING 2 TO 3 FEET OR MORE BEYOND THE LOWEST POINT OF THE KEEL.

KEEL GUARD SIZE GUIDE LINE:

SIZE KEEL GUARD:

8 Feet 

SUITS:

Boats up to 22 Foot

• PROTECT AGAINIST ABRASIVE SAND, ROCKS, CONCRETE RAMPS & OYSTER BEDS ELIMINATE COSTLY REPAIRS
• ENJOY THE HIGHEST QUALITY AND SUPPERIOR ENGINEERING
• INCREASE THE VALUE OF YOUR BOAT 
• MADE IN THE USA
• QUALITY 3M PRODUCT
• TYPICALLY , THE KEEL GUARD IS MOUNTED 4 TO 6 INCHES ABOVE THE WATERLINE ON THE BOW, ENDING 2 TO 3 FEET OR MORE BEYOND THE LOWEST POINT OF THE KEEL.